螺杆ASME B18.31.2 有段话怎么翻译好?

提问时间:2017-03-10
提问者: 潘吉
阅读量: 2822
问题详情 |
7 LENGTH 7.1 Overall Length The overall length, LT, of the stud is the distance, parallel to the axis of the stud from one end to the other end, measured to the extreme condition on each end. Tolerances for overall stud lengths are given in Table 5. 7.2 Nominal Length For both continuous and double-end type studs, the nominal length is the same as the overall length without tolerances. 7.3 Length Increments Stud lengths shall be in whole inches and one-quarter inch increments for lengths through 10 in. For stud lengths greater than 10 in., lengths shall be in whole inches and one-half inch increments
全部回复 共 0
回复 |
请先登录后再进行回复,前往登录
业务联系/技术支持
公司名称:广东金蜘蛛电脑网络有限公司
联系电话:020-38861363 38861343
电子邮箱:info@jzzfastener.com
QQ:1767548327
公众号:
视频号:
抖音号:
法律声明: 本网站中的厂商资料,供货、需求、合作、企业新闻等信息由本网站的注册会员发布,其合法性和真实性由各个发布信息的注册会员负责。
经营许可证编号:粤B2-20210752号丨备案号:粤ICP备09029740号
粤公网安备 44011102001662号
技术支持:广东金蜘蛛电脑网络有限公司
Golden Spider Network Co., Ltd.