【收藏】最新2020版紧固件日标（JIS）目录大全

　　2020年版紧固件日标

　　JIS Handbook

　　Fasteners & Screw Threads - 2020

　　简介

　　包括术语，标记和图纸/基础件（通用）/零部件/通用螺钉螺纹零部件（包括垫圈）。

JIS B 0002-1:1998 Technical drawings－Screw threads and threaded parts－Part 1: General conventions……ISO 6410-1:1993(IDT)

JIS B 0002-2:1998 Technical drawings－Screw threads and threaded parts－Part 2: Screw thread inserts……ISO 6410-2:1993(IDT)

JIS B 0002-3:1998 Technical drawings－Screw threads and threaded parts－Part 3: Simplified representation……ISO 6410-3:1993(IDT)

JIS B 0101:2013 Screw threads and fasteners－Vocabulary……ISO 1891, 5408:2009 (MOD)

JIS B 0123:1999 Designation system forscrew threads

JIS B 0143:2013 Fasteners－Bolts, screws, studs and nuts－Symbols and descriptions of dimensions……ISO 225:2010 (IDT)

JIS B 0147:2004 Blind rivets－Terminology and definitions……ISO 14588:2000 (IDT)

JIS B 1010:2003 Designation system for fasteners……ISO 8991:1986 (IDT)

JIS B 0202:1999 Parallel pipe threads……ISO 228-1:1994(MOD)

JIS B 0203:1999 Taper pipe threads……ISO 7-1:1994(MOD)

JIS B 0205-1:2001 ISO general purpose metric screw threads－Part 1:Basic Profile……ISO 68-1:1998 (IDT)

JIS B 0205-2:2001 ISO general purpose metric screw threads－Part 2: General Plan……ISO 261: 1998 (IDT)

JIS B 0205-3: 2001 ISO general purpose metric screw threads－Part 3: Selected sizes for screws, bolts and nuts……ISO 262:1998 (IDT)

JIS B 0205-4: 2001 ISO general purpose metric screw threads－Part 4: Basic Dimensions……ISO 724: 1993 (IDT)

JIS B 0206: 1973 Unified coarse screw threads……ISO 263: 1973 (MOD)

JIS B 0208: 1973 Unified fine screw threads……ISO 263:1973 (MOD)

JIS B 0209-1: 2001 ISO general purpose metric screw threads－Tolerances－Part 1: Principles and basic data……ISO 965-1:1998 (IDT)

JIS B 0209-2: 2001 ISO general purpose metric screw threads－Tolerances－Part 2: Limits of sizes for general purpose external and internal screw threads－Medium quality……ISO 965-2:1998 (IDT)

JIS B 0209-3: 2001 ISO general purpose metric screw threads－Tolerances－Part 3: Deviations for constructional screw threads……ISO 965-3: 1998 (IDT)

JIS B 0209-4: 2001 ISO general purpose metric screw threads－Tolerances－Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing……ISO965-4: 1998 (IDT)

JIS B 0209-5: 2001 ISO general purpose metric screw threads－Tolerances－Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum sizeof tolerance position h before galvanizing……ISO 965-5: 1998 (IDT)

JIS B 0210: 1973 Limits of sizes and tolerances for unified coarse screw threads

JIS B 0212: 1973 Limits of sizes and tolerances for unified fine screw threads

JIS B 0216-1: 2013 ISO metric trapezoidal screw threads－Part 1: Basic profiles and maximum material profiles……ISO 2901:1993 (IDT)

JIS B 0216-2: 2013 ISO metric trapezoidal screw threads－Part 2: General plan ……ISO 2902: 1977 (IDT)

JIS B 0216-3: 2013 ISO metric trapezoidal screw threads－Part 3: Basic　Dimensions……ISO 2904: 1977(IDT)

JIS B 0217-1: 2013 ISO metric trapezoidal screw threads－Tolerances－Part 1: Principles and basic data……ISO 2903:1993 (MOD)

JIS B 0217-2: 2013 ISO metric trapezoidal screw threads－Tolerances－Part 2: Limits of sizes for external and internal screw thread


JIS B 1001: 1985 Diameter of clearance holes and counterbores for bolts and Screws……ISO 273: 1979 (MOD)

JIS B 1002: 1985 Dimensions of widths across flats……ISO 272: 1982, 2343: 1972, 4762: 1977 (MOD)

JIS B 1003: 2014 Fasteners－Ends of parts with external ISO metric thread……ISO 4753: 2011(IDT)

JIS B 1004: 2009 Hole sizes before threading

JIS B 1005: 2003 General purpose bolts and screws－Metric series－Radii under the head……ISO 885:2000 (IDT)

JIS B 1006: 2009 Fasteners－Thread run-outs for external thread in accordance with ISO general purpose metric screw threads……ISO 3508: 1976 (MOD)

JIS B 1008: 2009 Fasteners－Bolts and studs－Split pin holes and wire holes……ISO 7378: 1983 (MOD)

JIS B 1012: 1985 Cross recesses for screws……ISO 4757:1983 (MOD)

JIS B 1013: 1994 Countersunk head screws－Head configuration and gauging……ISO 7721: 1983 (IDT)

JIS B 1014: 1994 Countersunk flat head screws－Part 2: Penetration depth of cross recesses……ISO 7721-2:1990 (IDT)

JIS B 1016: 2006 Gauging of hexagon sockets……ISO 23429: 2004(IDT)

JIS B 1017: 2008 Countersinks for countersunk head screws……ISO 15065: 2005 (IDT)

JIS B 1018: 2009 Fasteners－Thread undercuts for external metric ISO threads……ISO 4755: 1983 (IDT)

JIS B 1021: 2003 Tolerances for fasteners－Part 1: Bolts, screws, studs and nuts－Product grades A, Band C……ISO 4759-1: 2000 (IDT)

JIS B 1041: 1993 Fasteners－Surface discontinuities－Part 1: Bolts, screws and studs for general requirements……ISO 6157-1:1988 (IDT)

JIS B 1042: 1998 Fasteners－Surface discontinuities－Part 2: Nuts……ISO 6157-2:1995 (IDT)

JIS B 1043: 1993 Fasteners－Surface discontinuities－Part 3: Bolts, screws and studs for special requirements……ISO6157-3: 1988 (IDT)

JIS B 1044: 2001 Fasteners－Electroplated coatings……ISO 4042: 1999 (IDT)

JIS B 1045: 2001 Fasteners－Preloading test for the detection of hydrogen embrittlement－Parallel bearing surface method……ISO 15330: 1999 (IDT)

JIS B 1046: 2005 Fasteners－Non-electrolytically applied zinc flake coatings……ISO 10683: 2000 (IDT)

JIS B 1047: 2006 Passivation of corrosion-resistant stainless-steel fasteners………ISO 16048: 2003 (IDT)

JIS B 1048: 2007 Fasteners－Hot dipgalvanized coatings……ISO 10684: 2004 (MOD)

JIS B 1054-1: 2013 Mechanical properties of corrosion-resistant stainless steel fasteners－Part 1: Bolts, screws and studs……ISO 3506-1: 2009 (IDT)

JIS B 1054-2: 2013 Mechanical properties of corrosion-resistant stainless steel fasteners－Part 2: Nuts……ISO 3506-2:2009 (IDT)

JIS B 1054-3: 2013 Mechanical properties of corrosion-resistant stainless steel fasteners－ Part 3: Set screws and similar fasteners not　under tensile stress ………………ISO3506-3: 2009 (IDT)

JIS B 1054-4: 2013 Mechanical properties of corrosion-resistant stainless steel fasteners－Part 4: Tapping screws……ISO 3506-4: 2009 (IDT)

?JIS B 1056: 2019 Fasteners－Prevailing torque steel nuts－Functional properties……ISO 2320: 2015 (MOD)

JIS B 1057: 2001 Mechanical properties of non-ferrous metal fasteners……ISO 8839: 1986 (MOD)

JIS B 1058: 1995 Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal　diameters 1 mm to 10 mm……ISO 898-7:1992 (IDT)

JIS B 1059: 2001 Drilling screws with tapping screw thread－Mechanical and functional properties……ISO 10666:1999 (IDT)

JIS B 1060: 2003 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws……ISO7085: 1999 (IDT)

JIS B 1071: 2010 Fasteners－Methods of verification for size and geometry

JIS B 1081: 1997 Threaded fasteners－Axial load fatigue testing－Test　methods and evaluation of results……ISO 3800:1993 (IDT)

JIS B 1082: 2009 Stress area and bearing area for threaded fasteners

JIS B 1083: 2008 General rules for tightening of threaded fasteners

JIS B 1084: 2007 Fasteners－Torque/clamp force testing……ISO 16047: 2005 (IDT)

JIS B 1085: 1995 Cone proof load test on nuts……ISO 10485: 1991 (IDT)

JIS B 1086: 1998 Widening test on nuts……ISO 10484:1997 (IDT)

JIS B 1087: 2004 Blind rivets－Mechanical testing……ISO 14589:2000 (IDT)

JIS B 1091: 2003 Fasteners－Acceptance inspection……ISO 3269: 2000 (IDT)

JIS B 1092: 2006 Fasteners－Quality assurance system……ISO 16426: 2002 (IDT)

JIS B 1099: 2012 Fasteners－General requirements for bolts, screws, studs and Nuts……ISO 8992: 2005(IDT)


JIS B 1101: 2017 Slotted head screws……ISO 1207,1580, 2009, 2010: 2011 (MOD)

?JIS B 1107: 2018 Hexalobular socket head screws……ISO 14580:2011, 14581, 14582: 2013, 14583, 14584:2011 (MOD)

JIS B 1111: 2017 Cross recessed head screws……ISO 7045 ～ 7048: 2011(MOD)

JIS B 1116: 2009 Slotted head screws for precision instruments

JIS B 1119: 1995 Machine screws and nuts for spectacle frames……ISO 11381: 1994 (MOD)

JIS B 1130: 2012 Screw and washer assemblies made of steel with plain　washers－Washer hardness classes 200 HV and 300 HV……ISO 10644: 2009 (MOD)

JIS B 1188: 2017 Cross recessed head screws with captive washer

Sets crew

JIS B 1117: 2010 Slotted set screws……ISO 4766,7434 ～ 7436: 1983 (MOD)

JIS B 1118: 2010 Square head set screws

JIS B 1177: 2007 Hexagon socket set screws……ISO 4026 ～ 4029: 2003(MOD)

Tapping screw

JIS B 1115: 2015 Slotted head tapping screws……ISO 1481 ～ 1483: 2011 (MOD)

JIS B 1122: 2015 Cross recessed head tapping screws……ISO 7049 ～ 7051: 2011 (MOD)

JIS B 1123: 2015 Hexagon head tapping screws……ISO 1479: 2011 (MOD)

JIS B 1124: 2015 Drilling screws with tapping screw thread……ISO 15480 ～ 15483: 1999 (MOD)

JIS B 1125: 2015 Self drilling tapping screws

JIS B 1126: 2015 Hexagon washer head tapping screws……ISO 7053: 2011 (MOD)

JIS B 1127: 2015 Hexagon flange head tapping screws……ISO 10509: 2012 (MOD)

JIS B 1128: 2004 Hexalobular socket head tapping screws……ISO 14585 ～ 14587: 2001 (MOD)

JIS B 1129: 2004 Tapping screw washer assemblies with plain washers……ISO 10510: 1999 (IDT)

Wood screw

JIS B 1112: 1995 Cross-recessed head woods crews

JIS B 1135: 1995 Slotted head wood screws

Bolts

JIS B 1166: 2009 T-slot bolts

JIS B 1166: 2015 Amendment 1

JIS B 1168: 1994 Eyebolts

JIS B 1171: 2005 Cup head square neck bolts……ISO 8678:1988 (MOD)

JIS B 1171: 2015 Amendment 1

JIS B 1173: 2010 Studs

JIS B 1173: 2015 Amendment 1

JIS B 1174: 2017 Hexagon socket button head screws……ISO 7380-1, -2: 2011 (MOD)

JIS B 1175: 1988 Hexagon socket head shoulder screws……ISO 7379: 1983 (MOD)

JIS B 1176: 2014 Hexagon socket head capscrews……ISO 4762: 2004, 12474: 2010 (MOD)

JIS B 1176: 2015 Amendment 1

JIS B 1178: 2009 Foundation bolts

JIS B 1178: 2015 Amendment 1

JIS B 1179: 2009 Flat head bolts

JIS B 1179: 2015 Amendment 1

JIS B 1180: 2014 Hexagon head bolts and hexagon head screws……ISO 4014: 2011, 4015: 1979, 4016 ～ 4018, 8676,8765: 2011 (MOD)

JIS B 1182: 2009 Square head bolts

JIS B 1182: 2015 Amendment 1

JIS B 1184: 2010 Wing bolts

JIS B 1187: 2017 Hexagon head screws with captive washer

JIS B 1189: 2014 Hexagon bolts with flange……ISO 15071:2011, 15072: 2012 (MOD)

JIS B 1189: 2015 Amendment 1

JIS B 1194: 2006 Hexagon socket countersunk head screws……ISO 10642: 2004 (MOD)

JIS B 1195: 2009 Weld bolts

JIS B 1195: 2015 Amendment 1

Nuts

JIS B 1163: 2009 Square nuts

JIS B 1167: 2011 T-slot nuts

JIS B 1169: 1994 Eyenuts

JIS B 1170: 2011 Hexagon slotted and castle nuts

JIS B 1181: 2014 Hexagon nuts and hexagon thin nuts……ISO 4032 ～ 4036, 8673 ～ 8675: 2012 (MOD)

JIS B 1183: 2010 Domed cap nuts

JIS B 1185: 2010 Wing nuts

JIS B 1190: 2014 Hexagon nuts with flange……ISO 4161,10663: 2012 (MOD)

JIS B 1196: 2010 Weld nuts

JIS B 1199-1: 2001 Prevailing torque type nuts－Part 1: Hexagon nuts with non-metallic insert ……ISO 7040, 7041, 10511,10512: 1997 (MOD)

JIS B 1199-1: 2008 Amendment 1

JIS B 1199-2: 2001 Prevailing torque type nuts－Part 2: All-metal hexagon nuts……ISO 7042, 7719, 7720, 10513: 1997 (MOD)

JIS B 1199-3: 2001 Prevailing torque type nuts－Part 3: Hexagon nuts with flange with non-metallic insert……ISO 7043,12125: 1997 (MOD)

JIS B 1199-4: 2001 Prevailing torque type nuts－Part 4: All-metal hexagon nuts with flange……ISO 7044,12126: 1997 (MOD)

?JIS B 1200: 2018 Fasteners－Hexagon weld nuts with flange ……ISO 21670: 2014 (MOD)

JIS B 1216: 2006 Push-on spring nuts

Washers

JIS B 1250: 2008 Plain washers for metric bolts, screws and nuts for general purposes－General plan……ISO 887:2000 (IDT)

?JIS B 1251: 2018 Spring lock washers

JIS B 1256: 2008 Plain washers……ISO 7089 ～ 7094: 2000(MOD)

JIS B 1257: 2004 Plain washers for tapping screw and washer assemblies－Normal and large series－Productgrade A……ISO 10669: 1999 (IDT)

JIS B 1258: 2012 Plain washers for screw and washer assemblies－Small, normal and large series－Product grade A……ISO 10673: 2009 (MOD)

欲了解更多相关信息或购买标准书籍，可致电金蜘蛛紧固件网：020-38861363。

　　（来源：金蜘蛛紧固件网）