表面处理

东莞市颖兴金属表面处理材料有限公司-专注于冷塑性加工表面处理产品的研发与制造，主要产品有磷化液、润滑剂、清洗剂等，产品针对冷镦钢、工具钢、弹簧钢、钢绞线、不锈钢等多种材料

穩立貿易股份有限公司 | 为金属表面处理添加剂、工业用特种固体干膜润滑剂、紧固件专用润滑水蜡，有效降低紧固件及其他各类零组件之摩擦与磨损，甚能抗极压、耐高低温

达克罗涂覆

上海安福隆涂复工业有限公司-金蜘蛛紧固件网-人气超旺的紧固件采购螺丝,螺栓,螺柱,螺母,螺帽,螺钉,垫圈,挡圈,牙条,铆钉,销,焊钉标准件生产厂家,批发定制

模具

专业设备卖场

浙江友信|五模、六模轴承式高速螺帽成型机，六模、七模加长型冷镦零件成型机，经济型气压式四轴螺帽攻牙机，壁虎管毛坯，各种非标冷镦件

友情链接

垫圈，挡圈

螺栓

温州广全标准件制造有限公司-碳钢组合螺丝、SUS304不锈钢组合螺丝、高强度组合螺丝、GB6560三角牙螺丝

海盐宏润紧固件有限公司-法兰螺栓法兰螺丝非标法兰螺栓汽车安全带螺丝轮毂螺丝非标异形件

铆钉

展会信息

【收藏】第十版美标（IFI, ASME, ASTM, SAE）目录大全（最新）

发布时间：2019-11-12

点赞数：3

阅读量: 7727

| 核心提示：如需了解更多相关信息或购买标准书籍，可致电金蜘蛛传媒：020-38861363。

第十版美标（IFI, ASME,ASTM, SAE）目录大全（最新）

2018版《IFI紧固件标准手册》（第十版）
2018 Edition IFI Book of Fastener Standards
10th Edition

　　简介：

　　2018版《IFI紧固件标准手册》（第十版）汇编了最常用的英寸制紧固件标准和非ISO公制紧固件标准，由美国工业紧固件协会（IFI，Industrial Fastener Institute）出版。该书包含92个由ASTM、ASME、SAE和 IFI发布的标准尺寸。

　　自1941年推出以来，《IFI紧固件标准手册》一直被视为“紧固件行业圣经”，对于各行各业的设计师、制造业工程师和经理，该手册都是一本不可或缺的使用指南。

　　由于先前已经有第九版，因此第十版只收录了标准尺寸，更多的技术资料和注释需要另见《IFI 紧固件技术手册》。

目录：
TABLE OF CONTENTS

　　THREADS

　　ASME B1.1-2003 (R2008) Unified Inch Screw Threads (UN and UNR Thread Form)

　　ASME B1.2 1983 (R2017) Gages and Gaging for Unified Inch Screw Threads

　　ASME B1.3-2007 (R2017) Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

　　IFI-301 2008 (R2013) Gage Calibration Requirements and Procedures for Thread Gages

　　BOLTS, STUDS AND THREADED ROD

　　DIMENSIONS

　　ASME B18.2.1-2012 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws

　　ASME B18.5-2012 (R2017) Round Head Bolts (Inch Series)

　　ASME B18.9-2012 (R2017) Plow Bolts

　　ASME B18.10-2006 (R2016) Track Bolts and Nuts

　　ASME B18.31.2-2014 Continuous Thread Studs, Studs for Flange Bolting (Stud Bolts) and Double-End Studs (Inch Series)

　　ASME B18.31.3-2014 Threaded Rods (Inch Series)

　　ASME B18.31.5-2011 (R2016) Bent Bolts (Inch Series)

　　IFI-111-2014 Hex Flange Screws

　　IFI-115-2014 Flange 12-Point Screws

　　IFI-148-2002 (R2013) Threaded Projection Weld Studs

　　IFI-199-2014 Tap Bolts (Inch Series)

　　MATERIAL AND PHYSICAL

　　SAE J429-2014 Mechanical and Material Requirements for Externally Threaded Fasteners

　　ASTM A193/A193M-17 Alloy Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

　　ASTM A307-14e1 Carbon Steel Bolts, Studs, and Threaded Rod 60,000 PSI Tensile Strength

　　ASTM A320/A320M-17b Alloy-Steel and Stainless Steel Bolting Materials for Low Temperature Service

　　ASTM A354-17e1 Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

　　ASTM A394-08 (R2015) Steel Transmission Tower Bolts, Zinc Coated and Bare

　　ASTM A449-14 Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

　　ASTM A962/A962M-17 Common Requirements For Bolting Intended For Use At Any Temperature From Cryogenic To The Creep Range

　　ASTM F468-16 Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

　　ASTM F593-17 Stainless Steel Bolts, Hex Cap Screws, and Studs

　　ASTM F901-01 (R2017) Aluminum Transmission Tower Bolts and Nuts

　　ASTM F1554-17e1 Anchor Bolts, Steel, 36, 55 and 105-ksi Yield Strength

　　SOCKETS

　　DIMENSIONS

　　ASME B18.3-2012 Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)

　　MATERIAL AND PHYSICAL

　　ASTM A574-17 Alloy Steel Socket Head Cap Screws

　　ASTM F835-16 Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

　　ASTM F837-13e1 Stainless Steel Socket Head Cap Screws

　　ASTM F879-15 Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

　　ASTM F880-12 (R2017) Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

　　ASTM F912-11 (R2017) Alloy Steel Socket Set Screws

　　STRUCTURAL FASTENERS

　　DIMENSIONS

　　ASME B18.2.6-2010 Fasteners for Use in Structural Applications

　　MATERIAL AND PHYSICAL

　　ASTM F959/F959M-17 Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series

　　ASTM F3125/F3125M-15a High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions

　　ASTM F3148-17a High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions

　　NUTS

　　DIMENSIONS

　　ASME B18.2.2-2015 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)

　　ASME B18.6.9-2010 (R2017) Wing Nuts (Inch Series)

　　ASME B18.16.4-2008 (R2013) Serrated Hex Flange Locknuts: 90,000 psi (Inch Series)

　　ASME B18.16.6-2017 Prevailing Torque Locknuts (Inch Series)

　　MATERIAL AND PHYSICAL

　　SAE J995-2017 Mechanical and Material Requirements for Steel Nuts

　　ASTM A194/A194M-17a Carbon Steel, Alloy Steel and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

　　ASTM A563-15 Carbon and Alloy Steel Nuts

　　ASTM F467-13e2 Nonferrous Nuts for General Use

　　ASTM F594-09 (R2015) Stainless Steel Nuts

　　IFI-101 2002 (R2013) Torque-Tension Requirements for Prevailing-Torque Type Steel Hex and Hex Flange Nuts

　　IFI-155 2005 (R2013) Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Nuts (InchSeries)

　　IFI-160-2007 (R2013) Test Procedure for the Performance of Nuts with Pre-Applied Adhesive Coated Threads (Inch Series)

　　SCREWS

　　ASME B18.6.1-1981 (R2016) Wood Screws (Inch Series)

　　ASME B18.6.2-1998 (R2010) Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws (Inch Series)

　　ASME B18.6.3-2013 Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)

　　ASME B18.6.8-2010 (R2017) Thumb Screws and Wing Screws (Inch Series)

　　ASME B18.13-2017 Screw and Washer Assemblies — SEMS (Inch Series)

　　IFI-113-2015 Steel Self-Drilling Tapping Screws

　　ASTM C954-15 Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

　　ASTM C1002-16 Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

　　ASTM C1513-13 Steel Tapping Screws for Cold-Formed Steel Framing Connections

　　WASHERS

　　ASME B18.21.1-2009 (R2016) Washers: Helical Spring-Lock, Tooth Lock and Plain Washers (Inch Series)

　　ASTM F436/F436M-18 Hardened Steel Washers Inch and Metric Dimensions

　　ASTM F2437/F2437M Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

　　RIVETS

　　ASME B18.1.1-1972 (R2016) Small Solid Rivets 7/16 In. Nominal Diameter and Smaller

　　ASME B18.1.2-1972 (R2016) Large Rivets 1/2In. Nominal Diameter and Larger

　　ASME B18.7-2007 (R2017) General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and End Caps

　　IFI-110-2003 (R2013) Glossary of Terms Relating to Blind Rivets

　　IFI-114-2015 Break Mandrel Blind Rivets

　　IFI-116-2015 Multi-Grip Break Mandrel Blind Rivets

　　IFI-117-2003 (R2013) Pull Through Mandrel Blind Rivets

　　IFI-119-2003 (R2013) Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets

　　IFI-123-2003 (R2013) Drive Pin Blind Rivets

　　IFI-126-2003 (R2013) Break Mandrel Closed End Blind Rivets

　　IFI-130-2003 (R2013) Structural Splitting Self-Plugging Pull Mandrel Blind Rivets

　　IFI-134-2015 Structural Positive Locking, Self-Plugging Blind Rivets

　　IFI-135-2013 Mechanical Testing of Blind Rivets

　　IFI-137-2003 (R2013) Inspection and Quality Assurance for General Purpose Blind Rivets

　　PINS

　　ASME B18.8.1-2014 Clevis Pins and Cotter Pins (Inch Series)

　　ASME B18.8.2:2000 (R2010) Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins (Inch Series)

　　FINISHES

　　ASTM B695-04 (R2016) Coatings of Zinc Mechanically Deposited on Iron and Steel

　　ASTM F1941/F1941M-16 Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric

　　ASTM F2329/F2329M-15 Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

　　QUALITY

　　ASME B18.2.9-2010 (R2017) Straightness Gage and Gaging for Bolts and Screws

　　ASME B18.18-2017 Quality Assurance for Fasteners

　　ASTM A370-17a Standard Test Methods and Definitions for Mechanical Testing of Steel Products

　　ASTM F606/F606M-16 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

　　ASTM F788-13 Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

　　ASTM F812-12 (R2017) Surface Discontinuities of Nuts, Inch and Metric Series

　　ASTM F1470-18 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

　　ASTM F2282-15 Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

　　ASTM F2328-17 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts

　　IFI-124-2002 (R2013) Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Screws

　　IFI-125-2007 (R2013) Test Procedure for the Performance of Adhesive Coated Prevailing-Torque Screws

　　IFI-143-2002 (R2013) Test for Evaluating the Torque-Tension Relationship on Both Externally and Internally Threaded Fasteners

　　GRADE MARKINGS

　　REFERENCES

　　Standards Referenced

　　INDEXES

　　Index by Designation

　　Index by Keyword

　　欲了解更多相关信息或购买标准书籍，可致电金蜘蛛传媒：020-38861363。

　　（本文为金蜘蛛紧固件网专稿，转载请注明来源。）

本期话题：标准,金蜘蛛

| 最新相关信息

【收藏】2021版美标《IFI紧固件标准手册》（第11版）目录大全

2021-12-22

【收藏】第十版美标（IFI, ASME, ASTM, SAE）目录大全（最新）

2019-11-12

【收藏】德标（DIN EN ISO）目录大全

2019-11-11

【收藏】公制美标（IFI, ANSI, ASME, ASTM, SAE）目录大全

2018-12-14

【收藏】日标（JIS）目录大全

2018-06-12

请输入你的昵称：

评论内容：